5 Tips and Tricks When Repairing Your Garage Door 

The garage door keeps the trouble at bay from keeping your belongings safe from possible thieves and robbers. However, garage doors are not perfect. They have problems of their own especially if they’re aging. There are times when the garage doors warp or refuse to lock. The repair is going to cost you a lot, but you can also do the DIY approach especially if you the tools and experience of repairing one. The following are the basic tips and tricks we want to show you.  

Garage Door 

When the Power Goes Out 

If the power is suddenly out and the door was shut, like when you need the car out but you have to commute instead because you’re hurrying. When you get home, inspect the manual override. It is a cord with the red handle. You will notice that it dangles down from the guide track that the garage opener uses to close and open the door. Once that cord is pulled, you can now then close and open the door with your own power.  

Sagging Garage Door 

Once the door gets saggy, it becomes harder to open. Older and wooden garage door models are susceptible to fast wear and tear, just like human beings. If your door is a little saggy, square the door up with the tension rods which are positioned on the door’s back. You can tighten the rods at a turnbuckle so you can straighten out the door. The door will slowly adjust to the change, so you better give it a time. If the doors are not equipped with the tension rods we mentioned, buy some at local stores.  

Frozen Garage Doors 

If you live in an area where the winter season is really cold, the mechanism of your door opener might stiffen. The stiffening will cause the garage to lose power. Older garage doors model which are usually manufactured 15 or 20 years ago have pressure adjustments for lowering and rising. To keep the garage doors running smoothly for years, always check and adjust the settings. You can also hire professionals of Garage Door Repair in Lawrenceville GA to do the maintenance check-up of the garage door.  

Locking the Garage Door 

It’s important to keep the garage safe, so you always have to lock the garage. But there are times that the garage door is not secure and it won’t lock. What lock the door in place are the horizontal bars that move out from the door’s center into the slots along the door’s side. There will be a time that these bars will change positions especially if the doors are used multiple times per day. Realigning the bars means you have to unscrew the guide brackets on the door’s edges. After that, you have to reposition them so the bars would be guided into the locking slots.  

Soaking Up Stains 

If you use the garage to store your vehicle, you might find big oil stain once in a while especially if you work on the car. To soak it up, pulverized a piece of drywall and sprinkle the crumbled ones on the stain. Leave for 12 hours and rinse off the morning after. If there are stubborn stains, you might need to repeat the process.  

Read More

How to Refinish Hardwood Floors

Having a hardwood floor is beneficial. Aside from its durability and strength, you can easily refinish it once it wears down and age. You can also opt for hardwood floor refinishing in Charlotte NC if you’re doing a remodeling or renovation. The process involves sanding the blemish then applying a color so it looks good and new. Another good news is that you can DIY this stuff, just follow our guide below.  

Hardwood Floors 

Sanding vs Screening 

Once the wood floor loses its color and luster, our usual impulse is to sand it down until it shows its raw wood and then reapply a color to make it look good again. However, you should assess the situation first because that’s often the wrong solution for an aging hardwood floor. The right solution is refinishing it, not completely refinish it.  

The entire wood floor materials are coated, this coating eventually becomes scuffed scratched and dull overtime. You can get rid of this dullness by refinishing the hardwood floor. If you inspected that the damage is only on the surface and not deep on the wood, you can just add a new coat. Hardwood floor refinishing project is laborious, and 90% of it is mostly preparation. You need to be thorough when it comes to touching up deep scratches, cleaning the floor and roughening the finish with sanding screens.  

Step 1: Test for Adhesion 

You have to test some areas first before you coat the entire hardwood floor. Roughen up the test areas, the areas should be along the closet or wall and other is a high-traffic zone. Clean the area and roughen with sanding screen. Wipe the residue and apply a coating of polyurethane. Leave it for 24 hours then check if it’s smooth and doesn’t scrape off.  

Step 2: Prepare the Money and Purchase Materials  

Prepare your budget because you will spend more on the tools than the sanding and refinishing of the floor. So be smart. It’s wiser to coat two rooms than coating one room because you will really spend more. Most of the materials you need will be purchased from the home centers.  

These materials include scouring pads, liquid floor cleaner, bristle brush, a finish applicator, respirator, sanding screen and mask, gallon of mineral spirits and a buffer. You can buy some of them and rent some, or even borrow one from your neighbors.  

Step 3: Clean the Floor 

Clean the floor from elements like chewing gum, stains and other trouble spots. If the floor has scratches, apply a coat of mineral spirits to hide them. If the floor has a ridge, flatten it out by standing on it.  

Step 4: Buff the Floor 

Start buffing the floor at one wall then move backwards across the room. Do this slowly. Make sure you clean the room and other areas where the dust will gather.  

Step 5: Choose a Finish 

Start applying the finish at a wall. The best DIY finish is polyurethane. Make sure that the finish is recommended for wood refinishing before purchasing it. The entire project might take you one whole day.  

Read More

Three Major Advantages of Qualified Residential Roofers 

One of the very important parts of any structure or building is the roof. As a matter of fact, whenever your roofing system needs maintenance, inspection, or even repair service, the most ideal ways is to hire a professional and qualified roofing repair company in your area. Having said that, here are some important advantages that you can get from hiring a professional and highly skilled roofing company to install, repair, or maintain your residential roofing system.  

Residential Roofers 

Experience and Expertise in the Field 

Certainly, no online video or article can be able to match the experience and expertise of a professional and certified roofing contractor. As a matter of fact, a professional and highly reputable roofing company has a lot of expert contractors who are trained for many years in order to thoroughly assess the damage of a roof, install new roofing, as well as repair and maintain commercial or residential roofing system. In addition to that, a trusted and professional roofing service provider cannot only service residential or commercial property as a truly reputable and qualified roofing company knows how to service a structure or building that needs a new roofing installation or repair. For sure, if you only choose to hire a professional and skilled roofing company, your residential or commercial roof will certainly remain in great condition for many years to come.  

High Quality Materials and Specialized Tools 

One of the major concerns of having a reliable and highly reputable company must be customer satisfaction. And, because of that, a truly professional roofing company will only use the best quality roofing materials and products, and they will also make sure that they only use the most specialized and industry grade equipment in order to complete the job.   

Furthermore, the particular climate of your location might also require certain roofing materials, design, or even installation methods, which means a professional roofing contractor will certainly know the best type of roof materials for your home or commercial building.  

Knowledge of Safety Measures 

Working on a roof is surely a risky job and it must never be done by anyone who is not fully trained with the proper safety techniques. As a matter of fact, proper techniques of getting around safely on a roof, dismantling old roofing materials as well as moving materials are all part of the jobs that certified and professional roofing contractors in Vancouver WA know how to perform while keeping you and your loved ones, as well as themselves safe.  

Before you begin climbing onto your own residential roofing, you should first consider how much safer it could really be to hire a professional and certified roofing contractor instead. The moment you hire a professional and skilled roofing service provider, you will surely rest easy knowing that your residential property is in the hands of professionals. 

Furthermore, in order to make sure that you get to choose the right type of roofing or roofing material for your home, make sure that you only ask advices from the experts in this field. 

Read More